Bronze Bar Rod Extruded,Rolled,Cold Drawn

C11000 C17510 C18150 C70600 Bronze Bar Rod Extruded,Rolled

What is a bronze bar/rod? Bronze rods are copper rods that have been tin-plated. They are widely utilized, have excellent material qualities, good hot workability, uniform strength, strong corrosion resistance, and are simple to install and use.

sales2@ygalualloy.com

Product Description
Factory & Customers

1. What is a bronze bar/rod

Bronze rods are copper rods that have been tin-plated. They are widely utilized, have excellent material qualities, good hot workability, uniform strength, strong corrosion resistance, and are simple to install and use. There are numerous variations and types. The typical ones are based on various substances.

According to the size of the model, ordinary copper rods and tubes, including leaded and complex ones, can be classified as micro, small, medium, large, and super large.

The wind is strong, the appearance is strong and attractive, and the elimination of static and dust is swift.

The copper rod is strong, the copper tube is of high quality, the service life is long, the quality is good, the performance is high, the conductivity is high, the thermal conductivity is high, and the temperature resistance is high. It is suitable for automatic static and dust removal devices. It is wear-resistant, which can significantly increase the life of the mold and the quality of the product.

mostly utilized in the manufacturing of pens, bicycles, motorbikes, batteries, vehicles, and other products.

It is primarily utilized in springs, electrical switches, condenser tubes, heat exchanger parts, and seawater-operating components. It is extensively employed in a variety of industries, including electrical switches, aerospace, chemical instrumentation, and military goods.

Powerful processing equipment, including bronze smelting, extrusion, forging, drawing, heat treatment, and finishing operations, are used to produce this kind of bronze rod. The production of these bronze rods is appropriate for many different products, including switches, relays, connectors, terminals, connectors, contactors, thermostats, micromotor brushes, mobile phone battery shrapnel, and high-precision parts.

These products also require high strength, high hardness, high flexibility, and highly conductive materials.

Main grades of bronze: Tin bronze QSn 6.5-0.1/C51900, QSn 4-0.3/C 51100, QSn 4-4-4/C54400, QSn 7-0.2/C52100, etc. Aluminum bronze QAl9-4/C62300, QAl9-2, QAl10-3-1.5, QAl10-4-4/C63020, etc. Beryllium bronze QBe2, QBe1.7, QBe1.9, etc. Processing and shaping: copper plates, copper strips, copper tubes, copper rods, etc. Widely used in various types of electronic components, precision instruments, precision casting molds, explosion-proof equipment (no sparks on impact), aerospace aviation, etc.

Bronze rod model parameters

Trademark	Variety	State	Specification(mm)			Main features or performance parameters	The main direction of use	Implementation standards
			Thickness	Width	Length
QSn6.5-0.1/C51900	Tin phosphorus bronze plate	M、Y4、Y2、Y、T、TY	0.3~0.5	≤600	≤2000	See standard	General purpose, a wide range	B/T2040—2008
			>0.5~3.0	≤600	≤2000
			>3.0~12	≤600	≤2000
		R	9~50	≤600	≤2000	Thickness≤14mm Rm≥290MPa A11.3≥38%
QSn7-0.2/C52100	Tin bronze plate	M、 Y、T	0.3~3.0	≤550	≤2000	M State Rm≥295MPa A11.3≥40% Y State Rm540~690MPa A11.3≥8% T State Rm≥665MPa A11.3≥2%	General purpose, a wide range	GB/T2040—2008
			＞3.0~12	≤600	≤2000
QA19-2	Aluminum bronze plate	R	8~25	≤1000	≤2000	Thickness≤14mm Rm≥440MPa A11.3≥15%	General purpose, a wide range	GB/T2040—2008
		Y、M	3.0~12	≤1000	≤2000	M State Rm≥440MPa A11.3≥18% Y State Rm≥585MPa A11.3≥5%
QA19-4/C61900	Aluminum bronze plate	R	8~25	≤1000	≤2000	Actual measurement	General purpose, a wide range	Q/LT003-92
		y	3.0~12	≤1000	≤2000	Rm≥585MPa		GB/T2040—2008
QCr0.5	Chrome bronze plate	R	7~25	≤600	≤2000	HB≥50	Collector rings and seam welding machine disk electrodes, etc.	Q/LT003-92
		Y	0.5~3.0	300~600	≤2000	HB≥110		GB/T2040—2008
			3.0~15	≤600	≤2000		General purpose
QSi3-1	Silicon manganese bronze	Y、M、T	0.5~3.0	300~550	1000~2000	M State:Rm≥343MPa A11.3≥40% Y State:Rm 588~753MPa A11.3≥3%	Spring and other products	GB/T2040—2008
			3.0~10	600~1000	1000~2000
18 alloy	Imitation gold plate	M	0.5~10	≤600	1000~2000	Anti-corrosion, anti-rust	Handicrafts, decoration industry, etc.	Negotiate
CuNi2Si	Nickel silicon bronze	Y	2.0--3.0	≤600	≤2000	See standard	High-speed rail catenary parts	Corporate standards
QSi0.6-2.1	Nickel silicon bronze	TH04	1.0--3.0	≤600	1000~3000	Rm 480~580MPa A≥16%	High-speed rail catenary parts	GB/T30016-2013
Note: Non-standard range products can be determined through negotiation.

2. Chemical composition of bronze bar/rod

C61000 bronze bar/rod

Element	Al	Mn	Cu	Sn	Zn	Fe	Pb	Si	P	Total impurities
Element	Al	Mn	Cu	No greater than
Content	8.0-10.0	1.5-2.5	Margin	0.1	1.0	0.5	0.03	0.1	0.01	1.7

C61900 bronze bar/rod

Element	Al	Fe	Mn	Cu	Pb	Si	P	Zn	Total impurities
Element	Al	Fe	Mn	Cu	No greater than
Content	8.5-10.0	2.0-4.0	1.0-2.0	Margin	0.03	0.1	0.01	0.5	0.75

C63000, C63200 bronze bar/rod

Element	Al	Fe	Ni	Cu	Sn	Zn	Mn	Pb	Si	P	Total impurities
Element	Al	Fe	Ni	Cu	No greater than
Content	9.5-11.0	3.5-5.5	3.5-5.5	Margin	0.1	0.5	0.3	0.02	0.1	0.01	1.0

3. Mechanical properties of bronze bar/rod

Density g/cm: 7.5 Thermal processing temperature: 750-850℃ Annealing temperature: 700-750℃ Quenching temperature: 850℃ water Tempering temperature: 500-550℃ (HB hardness 110-178) Machinability/%: 20 Linear expansion coefficient: 16.2 (10-6/K) Thermal conductivity: 58.6 (W/(m.K) Conductivity: 6.58 Resistivity at 20℃: 0.12

Properties	Metric	Imperial
Hardness, Rockwell C	27	27
Tensile strength (M30 and O61 tempers)	690 MPa	100000 psi
Yield strength (M30 and O61 tempers)	380 MPa	55100 psi
Elongation at break (in 50 mm, 1% reduction in area)	1.00%	1.00%
Elastic modulus	117 GPa	17000 ksi
Compressive yield strength (at a permanent set of 0.1%)	450 MPa	65300 psi
Compressive yield strength (at a permanent set of 1%)	880 MPa	128000 psi
Poisson’s ratio	0.34	0.34
Charpy impact (@ 18.0 - 100°C/ -0.400 - 212°F, keyhole)	3.00 J	2.21 ft-lb
Izod impact (@ 18.0 - 100°C/ -0.400 - 212°F)	3.00 J	2.21 ft-lb
Fatigue strength (@# of cycles 1.00e+8, M30 temper)	460 MPa	66700 psi
Machinability (UNS C36000 (free-cutting brass) = 100)	20	20
Shear modulus	42.3 GPa	6140 ksi

4. Physical properties of bronze bar/rod

Properties	Metric	Imperial
Density	7.21 g/cc	0.260 lb/in³
Melting point	1047°C	1917°F

5. Specifications of bronze bar/rod

bronze bar/rod supplier in China

Being a trustworthy bronze bar/rod manufacturer and supplier, Shanghai Yinggui Metal Products Company aims to make manufacturing easier for our business partners. Shanghai Yinggui Metal offers C11000, C17510, C18150, C70600 etc. Series sales that can be used for aircraft aluminum, industry molding, automatic mechanic components, and die.

Material	Aluminum Bronze
Standard	ASTM, AISI, JIS, DIN, GB, EN
Grade	C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,C10930,C11000,C11300, C11400,C11500,C11600,C12000,C12200,C12300,C12500,C14200,C14420,C14500,C14510,C14520, C14530,C17200,C19200,C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400, C70620,C71000,C71500,C71520, C71640,C72200T1,T2,T3,TU1,TU0,TU2,TP1,TP2,TAg0.1,
Temper	O-H112; T3-T8; T351-T851
Size	thickness 0.3mm~100mm; Width 50mm~2500mm; Length 1000mm~12000mm
Surface	Mill finish, polished, anodizing, brushing, sandblasting, powder coating, etc
Payment terms	T/T,L/C,western union, Paypal
Price terms	CFR, FOB, CIF, Ex-work, CNF
Application	1)Further making utensils. 2)Solar reflective film. 3)The appearance of the building. 4)Interior decorating: ceilings, walls, etc. 5)Furniture cabinets. 6)Elevator decoration. 7)Signs, nameplate, bags making. 8)Decorated inside and outside the car. 9)Household appliances: refrigerators, microwave ovens, audio equipment, etc. 10) consumer electronics: mobile phones, digital cameras, MP3, U disk, etc.
Package	Standard export seaworthy package or as required.

6. Applications and characteristics of bronze bar/rod

Characteristics and applications of bronze bar/rod

Alloy grade	Main features	Application examples
C61000	Withstands heat and gas welding well and is not easily soldered	Bushings, gears, bushings, and other high-load-bearing structural parts
C61900	It has good plasticity at high temperatures and can be subjected to hot processing, such as hot forging, hot extrusion, and hot rolling.	High-strength and wear-resistant structural parts such as gears, rocker arms, bushings, bushings, disc nozzles, bearings, and fixed nuts can be mass-produced with stable quality.
C63000, C63200	It has good plasticity at high temperatures and can be used in various forms of thermal processing, such as hot forging, hot extrusion, hot bending, etc.	Bushings for aircraft landing gear driven cylinders and high-strength bushings, spherical seats, booster sliders, guide screws, driven shafts, support rings, fuel distribution valves, connecting rods and nuts for auxiliary machinery structures, etc.
QAI11-6-6	The machinability of the alloy is acceptable	Used to manufacture high-strength wear-resistant parts and parts working at temperatures below 500°C